SAE Felt Specifications
Previous Page
SAE F-51 (NO. P1511)
A high grade, high density felt similar to SAE F-3, but made in thicknesses below 1/8". This felt is recommended for the same applications as SAE F-50, but where tolerances and lengths of life are not as important.
| |
Aetna
Style
P1511 |
| SAE J314b |
F51 |
| ASTM (NTA) |
34R3X |
| CF-206 |
16R3X |
| Minimum Wool Content |
92% |
| CHLOROTHENE SOLUBLE Max. |
2.5% |
| WATER SOLUBLE Max. |
2.5% |
| Combined Chlor. & Water Sol. Max |
4.5% |
| ASH Max. |
2.5% |
| TENSILE STRENGTH PSI Min. |
300 |
| Splitting Resistance lb./2" W. Min |
NA |
| STANDARD WIDTH |
60" |
| COLOR |
GREY |
|
|
 |
Typical uses are:
- Thin cut parts such as gaskets and liners
|
|
| |
|
3/64" |
1/16" |
5/64" |
3/32" |
| THICK. |
NOMINAL |
.047 |
.063 |
.078 |
.094 |
| Roll Form ± |
.007 |
.007 |
.007 |
.007 |
| Cut Parts ± |
.010 |
.010 |
.010 |
.011 |
| WEIGHT |
Nom.lb./sq.yd. |
0.75 |
0.98 |
1.20 |
1.43 |
| lb.Min. |
0.71 |
0.94 |
1.16 |
1.39 |
| lb.max. |
0.79 |
1.01 |
1.24 |
1.46 |
|
|
